SUDURPASCHIM ONLINE MODEL EXAM SET 23 ( ASSISTANT SUB ENGINEER)

1. The line joining the front and top views of a point is called

2. The isometric length of the edge of the cube is obtained by

3. A circle will appear on an isometric drawing as

4. Perspective projection are mostly used in

5. The top view of an object is projected on the

6. Arrange the specific weight of wood(W), cement (C ), steel (S) and Coarse aggregate (A) in the increasing order.

7. Generally the unit of measurement of partition wall is

8. Generally, rent of building is

9. AC stands for

10. What is lift?

11. Work Charge Establishment cost is taken as

12. What is the cost of plastering of 4 walls of a room with length 10m, breadth 5m and height 2.5m at the rate of Rs. 100 per sq.m?

13. The Preliminary inspection of the area to be surveyed is known as

14. What are the advantages of plane table surveying ?

15 . An operation for determining the relative elevation of different points on the surface of the earth is called

16. A 20 cm Theodolite means

17. Which among the following doesn’t indicate the basic calculation of the total station?

18. The most reliable method of plotting a theodolite traverse, is

19. Process of becoming outer surface hard without setting inner surface of concrete is called

20. Good quality cement contains higher percentage of

21. Amount of pigment in color cement should not be more than

22. Cast iron contains carbon approximately

23. All burnt bricks are soaked in water for at least ………….. before use with cement mortar.

24. Lime concrete is used in

25. Tiles are used for

26. Top portion of bar chart gives

27. Daily work done means

28. The process of keeping of concrete in position

29. For ordinary cement, the maximum expansion by Le-chatlier method should be more than

30. The plinth level is normally provided ………………….above the ground.

31. Minimum width of tread for public building is

32. A joint in the masonry normal to the face of the wall is called

33. When DPC is to be laid over large areas. the material preferred is

34. The pH value of water fit for drinking, is

35. Drop manholes are generally provided in sewers for

36. Water content of sewage is about

37. In distribution pipes, drain valves are provided at

38. Which among these is a method of wiring?

39. In hill roads the side drains arc provided

40 Which of the following represents hardest grade of bitumen?

41. In hill road minimum sight distance required is

42. River training work is done for

43. Shape of mandatory sign board is

44. Timber bridge is suitable upto

45. Span of long span trail bridge is

46. Pinpoint the correct statement :

47. Attracting groynes are built

48. Underground (Sub-surface) source of water is

49. निजामती सेवा ऐनअनुसार भविष्यमा सरकारी सेवाको निम्ति अयोग्य नठहरिने गरी सेवाबाट हटाउने विभागीय सजाय कस्तो सजाय हो ?

35. गाउँपालिका/ नगरपालिकाको प्रत्येक आर्थिक वर्षको बजेट पेश कहिले सम्म गर्नु पर्छ ?